Posted by admin | Posted in | Posted on 17/02/2011
According to the instructions with my kit, the blue springs are the least Timing light. Once the springs are in, you'll have to put it all back together
9 Jan 2010 Hi all, I am looking for opinions on my mechanical timing curve. I used the Mr Gasket spring kit to cause my advance to occur quicker.
Compare the advance weights and springs from a Moroso kit (part No. Since the timing curve below your launch rpm is irrelevant to performance,
18 Nov 2008 So with this advance kit and the light springs, Since the timing curve on the Streetfire distributor is solely dependant on the spring
According to the instructions with my kit, the blue springs are the least Timing light. Once the springs are in, you'll have to put it all back together
MSD offers two kits, PN 8849 or PN 8848 that are supplied with nine boots and terminals. Timing Curve From Factory. Figure 3 Spring Combination Chart.
According to the instructions with my kit, the blue springs are the least Timing light. Once the springs are in, you'll have to put it all back together
Basically I want to play with the timing curve but cannot find where to order springs and I was able to use an HEI advance spring kit from O'Reillys.
ShopWiki has 5 results for msd chevy/gm weight & spring kit, advance mechanism gives you the opportunity to dial-in a timing curve to fit your needs.
Compare the advance weights and springs from a Moroso kit (part No. Since the timing curve below your launch rpm is irrelevant to performance,
Compare the advance weights and springs from a Moroso kit (part No. Since the timing curve below your launch rpm is irrelevant to performance,
ShopWiki has 5 results for msd chevy/gm weight & spring kit, advance mechanism gives you the opportunity to dial-in a timing curve to fit your needs.
If you use the Crane advance kit like I do you are looking to install one Blue These springs will give you an advance curve that starts at about 800 RPM If you try to set your initial timing with the engine idling above this RPM
MSD offers two kits, PN 8849 or PN 8848 that are supplied with nine boots and terminals. Timing Curve From Factory. Figure 3 Spring Combination Chart.
According to the instructions with my kit, the blue springs are the least Timing light. Once the springs are in, you'll have to put it all back together
Compare the advance weights and springs from a Moroso kit (part No. Since the timing curve below your launch rpm is irrelevant to performance,
Basically I want to play with the timing curve but cannot find where to order springs and I was able to use an HEI advance spring kit from O'Reillys.
No related posts.